The first and most important part is installing this driver for COM3.
=========================================================
It is very important that the computer is forced to install the mentioned "Preloader-&-CDC-Driver".
This makes it possible the COM3 to be reserved for the SP Flash Tools, so when we connect the Oppo
phone via USB to the computer, it is correctly addressed.
=========================================================
First we have to force the PC to install a special driver that will make it possible to communicate directly to the phone on a specific port COM3. The installation of the “Preloader and Gadget Serial COM3” Driver is explained in pictures. Inside the .RAR I have placed several screenshots (do not bother that they are in the same directory as the only important .INI file).
1.) Completely shut down the phone (press Power untill it goes OFF).
2.) Then press and keep pressed the Volume-Up Key and the Power Key, for several seconds, until it starts into Factory Mode, as shown in the screenshot. I saw only Chinese letters, so I’ve written the translation, just to have an idea. Do not jump into any section of it, just leave the phone like that.
3.) Then connect the USB cable to the computer. The PC will try to install a driver (most probably, it will not succeed). To help the process, we open Device Manager to display this in the picture, we double-click the problematic driver and choose Update Driver. Then we point to the folder with the extracted driver so it can install correctly.
=========================================================
One of the final examples, of how the successfull installation looks like,
is shown in the screenshot "12-Final-Result-in-Devices.jpg"
.Watch Video
Regard
Rizwan Khan
www.newcellcare.blogspot.in
Download The Driver
=========================================================
It is very important that the computer is forced to install the mentioned "Preloader-&-CDC-Driver".
This makes it possible the COM3 to be reserved for the SP Flash Tools, so when we connect the Oppo
phone via USB to the computer, it is correctly addressed.
=========================================================
First we have to force the PC to install a special driver that will make it possible to communicate directly to the phone on a specific port COM3. The installation of the “Preloader and Gadget Serial COM3” Driver is explained in pictures. Inside the .RAR I have placed several screenshots (do not bother that they are in the same directory as the only important .INI file).
1.) Completely shut down the phone (press Power untill it goes OFF).
2.) Then press and keep pressed the Volume-Up Key and the Power Key, for several seconds, until it starts into Factory Mode, as shown in the screenshot. I saw only Chinese letters, so I’ve written the translation, just to have an idea. Do not jump into any section of it, just leave the phone like that.
3.) Then connect the USB cable to the computer. The PC will try to install a driver (most probably, it will not succeed). To help the process, we open Device Manager to display this in the picture, we double-click the problematic driver and choose Update Driver. Then we point to the folder with the extracted driver so it can install correctly.
=========================================================
One of the final examples, of how the successfull installation looks like,
is shown in the screenshot "12-Final-Result-in-Devices.jpg"
Regard
Rizwan Khan
www.newcellcare.blogspot.in
Download The Driver
No comments:
Post a Comment